Klarstein VIRTUOSA FLEX 90 Bedienungsanleitung Seite 63

Setting the timer to turn more cooking zones off
The steps for setting more zones are similar to the steps of setting one zone:
When you set the time for several cooking zones simultaneously, decimal dots of the
relevant cooking zones are on. The minute display shows the min. timer. The dot of the
corresponding zone flashes.
(set to 15 minutes)
(set to 45 minutes)
Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the new min. timer and the dot of
corresponding zone will flash.
Note: Touch the heating zone selection control, the corresponding timer will be shown
in the timer indicator.
Using the stop and go control
1. When the cooking zones are running, touch the control
show „II" and stop heating. At this moment only
operated.
2. Touch again, the displays show the original setting, and the cooking zones keep
on heating.
all the displays will
, and „Lock" control can be
EN
63