Installation Manual; Controller Installation; Controller's Electric Connection - Cosmo Ckr6 Montageanleitung

CONTROLLER INSTALLATION

Install the regulator inside in a dry place, where it is not exposed to any strong electromag-
netic fields.

CONTROLLER'S ELECTRIC CONNECTION

Each project with constant temperature controller needs to base exclusi-
vely on customer design and calculations and needs to be in compliance
with valid rules and regulations. Pictures, diagrams and text in this manual
are intended solely as an example and the manufacturer does not accept
any responsibility for them. If you use content of this manual as a base for
your project, then you carry also full responsibility for it. Responsibility of
publisher for unprofessional, wrong and false information and consecutive
damage are explicitly excluded. We retain the right for technical errors,
mistakes, changes and corrections without prior notice.
Installation of controlling devices should be done by an expert with suitable qualifications
or by an authorised organisation. Before you deal with the main wiring, make sure that the
main switch is switched off.
You have to follow the rules for low-voltage installations IEC 60364 and VDE 0100, law
prescriptions for prevention of accidents, law prescriptions for environmental protection and
other national regulations.

Installation manual

INSTALLATION MANUAL
28