Factory Settings - Cosmo Ckr6 Montageanleitung

FACTORY SETTINGS

In the menu there are software tools to help with setting the controller.
Restoring the controller settings are made through the selection of:
RESET OF ALL CONTROLLER PARAMETERS
Restores all settings of parameters P1, S1 (except S1.1) and S2.
RESET OF ALL CONTROLLER SETTINGS AND RESTART INITIAL SETUP
Restores all parameters to default values and starts the initial setup.
SAVE USER'S SETTINGS
Save current parameter values as user's settings.
LOAD USER'S SETTINGS
Load previously saved user's settings.
Before performing of the commands stated above, the controller requires a
confirmation of the selected command.
Service manual
26