Herunterladen Diese Seite drucken

LIVARNO LUX 300324 Bedienungs- Und Sicherheitshinweise Seite 15

Led-lichtband mit bewegungssensor

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1 LED rope light
1 adhesive strip
4 batteries 1.5 V AAA
1 set of instructions for use
Parts Description
Slider (Setting "D" or "M" possible)
1
Battery compartment
2
Battery
3
Battery cover
4
Adhesive strip (Reverse side of battery
5
compartment)
ON / OFF button
6
Motion sensor
7
Adhesive strip (Reverse side of LED strip)
8
LED strip
9
Adhesive strip (for LED strip)
10
Technical Data
Item no.: 14121506L
LED Strip:
Operating voltage:
Batteries:
Illuminant:
Total wattage:
Protection class:
Protection type:
Range of the motion
detector:
Detection angle:
LED non-replaceable
Safety
Safety instructions
Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
liability for property damage or personal injury due
SELV 6 V
2 W
4 x 1.5 V AAA
30 LEDs (non-replaceable)
2 W
III /
IP20
max. 2 m
110°
to improper handling or failure to comply with the
safety instructions!
DANGER TO LIFE AND ACCI-
DENT HAZARD FOR TODDLERS
AND SMALL CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate dangers. Please always keep the
product out of the reach of children.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
long as they are supervised or instructed in the
safe use of the device and understand the as-
sociated risks. Do not allow children to play
with the device. Cleaning and user maintenance
must not be performed by children without
supervision.
Avoid the risk of fatal injury
from electric shock
Check the LED strip for damage before every
use. Never use the LED strip if any damage is
detected.
CAUTION!
In the case of damage, repairs or other prob-
lems, please contact the service centre or a
qualified electrician. If the cable is damaged,
the appliance must be disposed of. The appli-
ance contains no parts which may be serviced
by the consumer.
Never allow the live power leads and contacts
to come into contact with water or other liquids.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the lamp on damp or conductive
surfaces.
Do not install the LED strip in a flammable,
explosive or corrosive environment.
This LED strip must not be connected electroni-
cally with other LED strips.
Introduction / Safety
GB/IE
15

Werbung

loading