Gemü 601 Original Einbau- Und Montageanleitung Seite 18

Non-observance can cause:
Personal hazard due to electrical,

mechanical and chemical eff ects.
Hazard to nearby equipment.

Failure of important functions.

Hazard to the environment due to

the leakage of dangerous materials.
Prior to commissioning
Read the installation, operating and
G
maintenance instructions.
Provide adequate training for the
G
installation and operating personnel.
Ensure that the contents of the
G
installation, operating and maintenance
instructions have been fully understood
by the responsible personnel.
Defi ne the areas of responsibility.
G
During operation
Keep the installation, operating and
G
maintenance instructions available at the
place of use.
Observe the safety notes.
G
Use only in accordance with the
G
operational data.
Any servicing work and repairs not
G
described in the installation, operating
and maintenance instructions may not be
performed without previous consultation
with the manufacturer.
DANGER
Strictly observe the safety data sheets
or the safety regulations valid for the
media used.
In case of uncertainty
Consult the nearest GEMÜ sales offi ce.

601, 602_us
2.2 Warning notes
Wherever possible, warning notes are
organised according to the following scheme:
Type and source of the danger
Possible consequences of
®
non-observance.
Measures for avoiding danger.
G
Warning notes are always marked with
a signal word and sometimes also with a
symbol for the specifi c danger.
The following signal words and danger levels
are used:
Imminent danger!
Non-observance will lead to death or
®
severe injury.
A possibly dangerous situation!
Non-observance can cause death or
®
severe injury.
CAUTION (WITHOUT SYMBOL)
A possibly dangerous situation!
Non-observance can cause damage to
®
property.
2.3 Symbols used
Danger - hot surfaces!
Danger - corrosive materials!
Hand: indicates general notes and
+
recommendations.
Point: indicates the tasks to be
G
performed.
18/32
SIGNAL WORD
DANGER
WARNING