Promise Technology FASTTRAK TX2200 Schnellstartanleitung Seite 8

FastTrak TX2200/2300, TX4200/4300 Quick Start Guide
• Security, using an existing disk drive and a new one (page 10)
• Security, using Quick Initialization (page 13)
The first three steps are the same for all four choices. After that, follow the steps
for the logical disk you want to create.
1. Boot your system. If this is the first time you have booted with the FastTrak
TX2200/2300 or TX4200/4300 RAID Controller card and drives installed, the
Promise onboard BIOS will display the following screen.
FastTrak TX4300 (tm) BIOS Version 2.00.0.xx
Copyright (c) 2003 Promise Technology, Inc.
Updated in 2004
No Array is defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility...
Press <ESC> to continue booting...
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu.
3. Press "1" to display the Auto Setup Menu (below).
FastBuild (tm) Utility 2.03 (c) 2002-2005 Promise Technology, Inc.
Optimize Array for:
Mode ............................................. Stripe
Spare Drive ...................................... 0
Drive(s) Used in Array ........................... 2
Array Disk Capacity (size in MB) ................. 32083
[ , ,Space] Change Option
This is the fastest and easiest method to creating your first logical disk.
[ Auto Setup Options Menu ]
Performance
[ Array Setup Configuration ]
[ Keys Available ]
[ESC] Exit
8
[Ctrl-Y] Save