Herunterladen Inhalt Inhalt Diese Seite drucken

Promise Technology FASTTRAK TX2200 Schnellstartanleitung Seite 13

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
Security Logical Disk with Quick Initialization
Use this setting to create a Mirrored (RAID 1) logical disk with one or two existing
disk drives containing data that you do not want to keep. This method creates a
mirrored logical disk and erases the first data block from your existing drives.
Under the Security setting in Auto Setup, FastTrak assigns two drives for a single
Mirrored logical disk or four drives (TX4200/4300) for a Striped/Mirrored logical
disk (RAID 10).
Choose this method if you wish to create a mirrored logical disk with existing disk
drives but you do not want to keep the data currently on those drives.
Follow these steps:
1.
Press the Spacebar to choose Security under the Optimize Array section.
2.
Press Ctrl-Y to Save your selection.
The window below will appear.
Do you want the disk image to be
duplicated to another or do quick
initialize or create only? (Y/N/I)
Y - Create and Duplicate
N - Create Only
I - Create and Quick Initialize
2-drive RAID 1 logical disk
3.
For the Create and Quick Initialize option:
Press I if you have a two-drive RAID 1 logical disk (above, left).
Press Y if you have a four-drive RAID 10 logical disk (above, right).
4.
Press Y to verify that you want your disks initialized.
5.
Press Esc twice to exit FastBuild and continue booting your computer.
Proceed to Step 5 and install the FastTrak driver.
Using the Quick Initialization option on existing drives will result in
the loss of all data on those drives.
Choose Quick Initialize will delete
any existing data on your hard disks.
Y - Continue, Others - Cancel
Step 4: Create Your Logical Disk
Warning
Do you want to do quick initialize
or create only? (Yes/No)
Y - Create and Quick Initialize
N - Create Only
4-drive RAID 10 logical disk
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis