Promise Technology FASTTRAK TX2200 Schnellstartanleitung Seite 11

Choose this method if you wish to use a drive that already contains data and/or is
the bootable drive from your system. Obtain a second disk drive of equal or larger
storage capacity.
If you plan to create a Security logical disk using an existing disk
drive, backup any important data. Failure to do so could result in
data loss.
If you wish to include your current bootable drive using the
Windows 2000, XP or Server 2003 operating system as part of a
bootable Mirrored (RAID 1) logical disk, do NOT connect the disk
drive to the FastTrak yet.
You MUST install the FastTrak driver to this disk drive while it is
still attached to your existing disk drive controller. See chapter 4 of
the FastTrak TX2200/2300, TX4200/4300 User Manual for more
information.
Follow these steps:
1. Press the Spacebar to choose Security under the Optimize Array section.
2. Press Ctrl-Y to Save your selection. The window below will appear.
3. Press Y for the Create and Duplicate option.
The window below will appear asking you to select the Source drive to use.
Do you want the disk image to be
duplicated to another or do quick
initialize or create only? (Y/N/I)
Y - Create and Duplicate
N - Create Only
I - Create and Quick Initialize
11
Step 4: Create Your Logical Disk
Warning
Important