INTERSPIRO SPIROMATIC 90U Bedienungsanleitung Seite 2

ENGLISH
E N G L I SH U SER M AN UAL
Spiromatic 90U S-Mask
The apparatus has been tested in accordance with EN 137 for types of use specified.
EC type examined (Directive 89/686/EEC) by SGS Yarsley ICS Ltd., Weston-super-
Mare, BS22 OWA, UK. Tested in accordance with GA 124-2004.
SAFETY NOTICE
The product must only be used with:
Interspiro cylinders:
ATTENTION! BREATHING APPARATUS WITH TWIN CYLINDER CONFIGURATIONS: SPIROLITE 6.7L, COMPOSITE
WITH ALUMINIUM LINER 6.8L OR 9.0L AND STEEL CYLINDERS 4L OR 6L, EXCEEDS THE TOTAL WEIGHT LIMIT
ACCORDING TO 6.6 IN EN 137:2006.
The product must only be used by personnel in good health and trained in the use
of respiratory protective equipment. Individuals with beards or large sideburns may
not obtain an adequate seal. The apparatus must be maintained, serviced and
tested as described in this user manual, Interspiro service manuals and Interspiro test
instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
Changes to this document - necessitated by typographical errors, inaccuracies of
current information or improvements and changes of equipment - may be made at any
time without prior notice. Always refer to www.interspiro.com for product updates,
document updates and service bulletins. Exposure to extreme conditions may require
other actions than described in this manual. The guarantees and warranties specified
in the conditions of sale are not extended by this Safety Notice.
The breathing air with which the cylinders are charged must meet the requirements
according to EN 12021, being free from oil, toxic substances and having low
humidity.
The duration of a compressed air breathing apparatus depends on the volume of air
in the compressed air cylinder(s) and the air consumption, which is specific to the
wearer and affected by the work load. When taking air from the extra air connection,
which some models are equipped with, the air consumption increases and the
duration of the apparatus decreases.
If the ambient temperatures is 0°C or below external icing can cause malfunction of
the warning whistle. Under such circumstances the pressure gauge must be read more
frequently.
2
Spirolite 3.4L or 6.7L
Composite with aluminium liner 6.8L or 9.0L
Steel 4L or 6L