Herunterladen Diese Seite drucken

TEUFELBERGER ROPSTOP 3 Herstellerinformation Und Gebrauchsanleitung Seite 10

Mitlaufendes auffanggerät

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
USE
It is crucial to safety to ensure prior to any work
assignment that there is enough free space F at the
work site under the user (stand space) (prevention
of an impact on the ground or on an obstacle.)
Pic. 1: Explanation L
F
For this system a required free space
F = 4,5 m + D
shall be taken into account. (The
F
elongation of the strap connection and the lengthe-
ning at the fall arrest harness is neglected).
L
= length of the guide between the anchor point
F
and the fall arrester
D
= L
x 0.25
F
F
10
and D
F.
The following table shows some examples:
Length
Elongation
L
[m]
D
[m]
F
F
5
1,25
10
2,50
15
3,75
20
5,00
1. How to fix the flexible anchor line at an an-
chor point:
Hook the carabiner of the guide rope at the anchor
point and make sure that it is properly closed (e.g.
screw lock tightened). Make sure that the carabiner
is freely movable in the anchor point and protected
against damage. (e.g. to avoid transverse loads or
edge loads)
Protect the guide rope against sharp-edged objects
(e.g. by means of edge protection).
Maximum nominal load: 130 kg
(= maximum weight of user incl. tools and gear)
CAUTION! When using these products in a fall pro-
tection system, it is imperative to observe the perti-
nent specifications contained in the manufacturer's
information for the products used!
For the guided-type fall arrester only the following
anchor lines customized by the manufacturer may
be used:
Teufelberger kernmantle safety rope Tutor 12
mm dyn (EN 353-2) + Dynaflex 12mm
Teufelberger kernmantle safety rope Tutor 12
mm hst (EN 353-2 /EN 1891A) + Tutor XG 12mm
Teufelberger kernmantle safety rope Patron 12
mm (EN 353-2 /EN 1891A)
The ROPSTOP 3 system must always include an in-
tegrated webbing energy absorber (BFD) tested
in the system:
Variant 1: (Ropstop3 + BFD): webbing energy
absorber as a connection between the fall ar-
rester and the fall arrest harness (designated
Ropstop3+BFD) or
Required free space
F [m] (incl. 1 m safety
distance)
5,75
7,00
8,25
9,00

Werbung

loading