TEUFELBERGER treeMOTION Herstellerinformation Und Gebrauchsanleitung Seite 6

Picture 17
17. Thread the rubber connection
through the cord stopper and fa-
sten the rope end with a knot.
When using the harness, please be sure to observe the Manufacturer Information regarding our
treeMOTION / treeMOTION s.light product. Any and all information concerning transport, storage,
and cleaning shall also apply to the harness with exchanged leg loop.
Please keep in mind that replacing the leg loop will not prolong the service life of the harness as
counted from the date of its manufacture. The leg loop is only one of the harness components –
after replacing it, the product can be used throughout its full service life provided that all other
components of the harness are in a proper condition. To evaluate the condition, please observe
the treeMOTION / treeMOTION s.light Product Information document or consult a person compe-
tent to make such evaluations.
The person responsible for the replacement will record the replacement of the leg loop on the re-
levant form appended to the treeMOTION / treeMOTION s.light User's Guide and will confirm his/
her entry by documenting the date of the entry and affixing his/her signature.
CAUTION
Use of the products can be dangerous. Our products are to be used only for their intended
purpose. The customer must ensure that the user is familiar with the proper application and the
necessary safety procedures. Be aware that every product can cause harm if it is used improper-
ly or overstressed. Subject to technical changes as well as written and print errors.
6
INSTALLATION
INSTRUCTION
Picture 18
18. Check once more that the
leg loop has been positioned
correctly.