TEUFELBERGER treeMOTION Herstellerinformation Und Gebrauchsanleitung Seite 3

INSTALLATION
INSTRUCTION
The following pictures show a treeMOTION. Separate pictures for the treeMOTION s.light
will be shown only where technically necessary. At first, change only one leg loop. This way,
you will still be able to use the second original leg loop as a reference. Only after having verified that
the replaced leg loop is positioned correctly, you may proceed to changing the second leg loop.
Picture 1
1. Remove the leg loop's rubber
connections to the waist belt and
thread the new rubber connec-
tions into the waist belt.
Picture 4
4. Fasten the leg padding to the new leg loop.
Picture 2
2. Remove the used webbing of
the leg loop and, while doing so,
make sure to not damage any
other parts of the harness.
Picture 5
5. Pass the webbing of the leg loop through the fa-
stening ring.
Picture 6
6. Pull the webbing
through the elastic
loop.
Picture 3
3. Remove the leg padding from
the used leg loop.
3