Panasonic TY-WK4P1RW Anleitung Zur Anbringung Seite 7

Verfügbare Sprachen

7. Anchoring the plasma TV

Install the accessory Unit fastening screws

mounting holes on the sides (left and right) of the wall-hanging

bracket used to secure the plasma TV.

Securely tighten the left and right red-marked screws

at the left and one at the right) used to anchor and release the

plasma TV in the red-marked screw mounting holes on the side

of the wall-hanging bracket used to anchor and release the

plasma TV.

(Tightening torque: 1.2 to 1.5 N•m)

Note

• In order to prevent the plasma TV from becoming disengaged from the

wall-hanging bracket, the Unit fastening screws

tightened at the left and right as far as their bases.

8. How to remove the plasma TV from the

wall-hanging bracket

Remove the Unit fastening screws

the right) installed at the sides of the wall-hanging bracket.

While lifting the bottom part of the plasma TV, pull the plasma

TV toward you.

Once the insulation spacers at the bottom have been released,

lift the plasma TV straight up.

(2) into the screw

(one

must be securely

(one at the left and one at

Red-marked screw

used to anchor

and release the plasma TV

Unit fastening screw

Hole for mounting the screw

used to anchor the plasma

Mounting hole for red-

marked screw used to

anchor and release the

plasma TV

Wall-hanging bracket

Unit fastening screw

Insulation spacer at the

bottom