Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Group control
7.1 Group control (see Fig. 3)
Group control applies for the individual device and also for
all the devices connected via the data line (D and –). It is
activated by closing an external switch (see Fig. 1, Pos
).
The devices connected via the data line are divided into
"master" and "slaves". The control module which initiated
group control is automatically the master. The outputs of all
the devices deliver the output signal specified by the
master. The functions set on the master are adopted by the
slaves, except for reset and self-test. The master and slave
can be operated by all the pushbuttons.
7.2 Ending group control
Group control is ended by placing the switch
on the
master in the "off" position. If there is a faulty signal
transmission between the master and slave, the connected
"slaves" switch off and return to individual control.
67
Werbung
