ABB 6597-/STD-SBS Serie Bedienungsanleitung Seite 60

Modes of operation/Fig. 4
5.2 Assignment of the coding switch
The factory setting of all the pins and the change-over
switch in the coding switch (see Fig. 4) is "off ".
= Soft ON
on = activated
= Soft OFF
on = activated
= Staircase lighting
on = activated
= "Vacation"
on = activated
= Cleaning light
on = increased brightness level
= Switch for analog operation
on = switch in pushbutton T1 activated
= Self-test
on = activated
= Reset
on = activated
•
= Change-over switch for control output
off = 0 - 10 V, on = 0 - 20 mA
GB
8
7
6
5
4
3
2
1
→
on
Fig. 4
60