ABB 6597-/STD-SBS Serie Bedienungsanleitung Seite 65

Modes of operation
5.11 Analog mode
• 0 - 10 V or 0 - 20 mA operation is selected via the change-
over switch •
("off" = 0 - 10 V "on" = 0 - 20 mA)
Both channels operate synchronously. The device is
switched off below a threshold of 10% of the input signal;
above this threshold, the device switches on with the
minimum brightness level and reaches maximum brightness
level at 100%.
NOTE
If the analog operation = switching/dimming is to be
separated, please note point 5.8.
on the coding switch.
GB
65