Respekta CH 21060 S-A Bedienungsanleitung Seite 39

4. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and
fat-dissolving detergent.
5. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
6. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
7. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
8. Do not use any abrasive detergents.
Disregarding the cleaning and maintenance instructions will cause
Replacing/cleaning of the grease filters
You do not need to replace metal filters. Clean them once a month carefully by
hand. Do not use any acrid, abrasive or corrosive detergents!
Dry the filters properly before you reinstall them.
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant.
1. Replace a defective illuminant immediately.
2. Disconnect the appliance from the mains.
3. Let the illuminant cool down before replacing.
4. Remove the installation-rim of the illuminant by turning it anticlockwise.
an increased risk of fire.
Metal/aluminium
Do not clean the filters in a dishwasher;
otherwise you will damage the filters.
Replacing of the illuminant
Use a thin cloth or a thin glove.
WARNING!
39