Herunterladen Diese Seite drucken

HomeMatic HmIP-SCI Montage- Und Bedienungsanleitung Seite 39

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the device, please pro-
ceed as follows:
When mounted, the cover (A) can easily be re-
moved from the electronic unit (F) (see figure 2).
Remove a battery.
Re-insert the battery making sure that it is right
way around while pressing the system button (B)
at the same time. Press and hold down the sys-
tem button until the device LED (B) starts to flash
quickly orange (see figure 3).
Release the system button briefly and then press
and hold the system button again until the or-
ange flashing changes to a green lighting.
Release the system button to finish the procedure.
The device will perform a restart.
9
Maintenance and cleaning
The device does not require you to carry out any
maintenance other than replacing the battery
when necessary. Enlist the help of an expert to
carry out any repairs.
Restore factory settings
39

Werbung

loading