Herunterladen Diese Seite drucken

Husqvarna Aspire H50-P4A Bedienungsanweisung Seite 10

Vorschau ausblenden Andere Handbücher für Aspire H50-P4A:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
recommended to use the machine in very bad
weather, for instance in dense fog, heavy rain,
strong winds, intense cold, risk of lightning, etc.
Faulty blades can increase the risk of accidents.
Do not allow children to use or be in the vicinity
of the product. Since the product is easy to start,
children may be able to start it if they are not kept
under full surveillance. This can mean a risk of
serious personal injury. Disconnect the battery when
the product is not under close supervision.
Ensure that no people or animals come closer than
15 metres while you work. When several operators
are working in the same area the safety distance
should be at least 15 metres. Otherwise there is
a risk of serious personal injury. Stop the product
immediately if anyone approaches. Never swing the
product around without first checking behind you to
make sure that no one is within the safety zone.
Ensure that people, animals or other things can
not affect your control of the product or that they
do not come in contact with the cutting attachment
or loose objects that are thrown out by the cutting
attachment. However, do not use the product unless
you are able to call for help in the event of an
accident.
Always inspect the working area. Remove all loose
objects such as stones, broken glass, nails, steel
wire, string, etc., that could be thrown out or become
wrapped around the cutting attachment.
Make sure that you can move and stand safely.
Check the area around you for possible obstacles
(roots, rocks, branches, ditches, etcetera) in case
you have to move suddenly. Take great care when
you work on sloping ground.
Keep a good balance and a firm foothold at all times.
Do not overreach.
Deactivate the product before you move to another
area. Attach the transport guard when the product is
not in use.
Never put the product down unless you have
deactivated it and removed the battery. Do not leave
the product unsupervised when it is switched on.
Make sure that no clothes or parts of the body
come in contact with the cutting attachment when
the product is activated.
If anything jams in the blades while you operate
the product, stop and deactivate the product. Make
sure that the cutting attachment stops completely.
Remove the battery before you clean, inspect or
repair the product and/or the blades.
Keep your hands and feet away from the cutting
attachment until it has stopped completely when the
product is deactivated.
Watch out for stumps of branches that can be thrown
out when you cut. Do not cut to close to the ground
where stones and other objects can be thrown out.
Watch out for thrown objects. Always wear
approved eye protection. Never lean over the cutting
attachment guard. Stones, rubbish, etcetera, can be
10
thrown up into the eyes which can cause blindness
or serious injury.
Listen out for warning signals or shouts when
you wear hearing protection. Always remove your
hearing protection as soon as the product stops.
Never work from a ladder, stool or any other raised
position that is not fully secured.
Use both hands when you hold the product. Hold the
product at the side of your body.
(Fig. 17)
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it can decrease the
degree of injury. Speak to your dealer for more
information.
Use a protective helmet where there is a risk of
falling objects.
(Fig. 18)
Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
(Fig. 19)
Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USA or EN 166 in EU
countries.
(Fig. 20)
Use protective gloves during operation and
maintenance.
(Fig. 21)
Use protective boots or shoes with non-slip soles.
(Fig. 22)
Use clothing made of a strong fabric. Your clothing
must be close-fitting but not limit your movements.
Use long pants and put your hair behind your
shoulders. Do not use jewelry and open shoes.
Keep first aid equipment near.
(Fig. 23)
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
Read the warning
Read the warning
1888 - 002 - 12.07.2022

Werbung

loading