Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS FOR USE WITH REMOTE PANEL EKWHCTRL1
5.1
Wall-mounted control panel with room probe
The wall-mounted control panel EKWHCTRL1 is a
thermostat
fitted
with
possibility of controlling one or more (up to a maximum
of 30) convectors in broadcast mode (with simultaneous
data transmission).
The control panel has its own memory, therefore no settings
will be lost in case of shut-down or power outage.
Any failure of the individual terminals connected will
not be signalled by the wall-mounted panel.
Thanks to the temperature probe it ensures anti-freeze
safety even when set to stand-by.
5.2
Display
The display also offers information on the statuses and on
any active alarms through 8 specific symbols:
EN
30
temperature
probe
with
Automatic operation
Silent operation
Maximum ventilation speed
Night function
Heating on
the
After 20 seconds from the last action the panel
brightness will be reduced and on the display will
appear the room temperature. Press any key to
restore maximum brightness.
Cooling on
Supervision on. Flashing with
CP presence contact closed.
Alarm indication (light on)
Panel off indication
Werbung
