Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MT400
8
Programming MagicTouch
See fig. e
8.1
Programmable functions
The standard settings are printed in bold.
Function
Activation time for central
locking system
Convenience function
Control for door contact switch
Control for hazard lights system
8.2
Programming functions
➤ Open the vehicle door.
➤ Switch on the ignition.
➤ Press and hold the "Open" button and switch the ignition off.
➤ Let go of the button.
✓ The status LED and the hazard lights are lit continually.
✓ The system is now in programming mode.
➤ Select the corresponding setting in accordance with the table, see chapter "Programmable
functions" on page 17.
✓ The status LED and the hazard lights go out while the value is being saved.
✓ After 2 sec. you will receive a confirmation:
– After pressing the "Close" button: status LED and hazard lights flash once.
– After pressing the "Open" button: status LED and hazard lights flash twice.
✓ When the status LED and hazard lights are lit continually, the function has been programmed.
You can now program other functions or exit programming mode.
To exit programming mode:
➤ Switch on the ignition.
EN
Values
3 sec.
0.7 sec.
activated
deactivated
positive connection
negative connection
activated
deactivated
Programming MagicTouch
Press button
1 x "Close" button
1 x "Open" button
2 x "Close" button
2 x "Open" button
3 x "Close" button
3 x "Open" button
4 x "Close" button
4 x "Open" button
17
Werbung
