Kenwood KWL90.004SI Bedienungsanleitungen Seite 21

Troubleshooting Guide
Problem
Display screen not
registering small
quantities.
Weight changed on
display screen.
Unable to switch
quickly between metric
and imperial units.
1) Fast single beep.
2) Quick double beep
3) Triple Beep
Cause
Quantity weighed too
small.
Appliance moved during
operation.
Mixer head raised or
lowered during operation.
Appliance is reconfiguring
to display previously
selected unit and
measurement.
1) Pressing the control
dial to start or stop the
machine or the head is
lifted during operation
2) Appliance waiting –
appliance will give a
quick double beep 10
minutes and 5 minutes
before the end of the
keep warm cycle.
3) Signifies the following;
- End of preset
programme
- End of manual
operation
- End of keep warm
cycle
- When appliance is
about to stir.
17
Solution
Use teaspoon or tablespoon
measures for very small
quantities.
Always place the appliance on
a dry flat stable surface prior to
weighing.
Ensure that the power cable is
not under tension.
Do not move the appliance
during operation of the
weighing function.
Zero the display before
weighing next ingredients.
Wait 5 seconds and try again.
Normal Operation
Normal Operation
Normal Operation