Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4. Advanced tuning
The module offers a variety of setting options. These can be selected and deselected via a menu. The settings menu
can be called up by starting the tuning mode (see 3.3) and then waiting until the 10 km/h display jumps to 11 km/h
(after approx. 15 seconds). The individual menu items listed below can then be selected by generating sensor signals.
A sensor signal is generated by turning the rear wheel as soon as the magnet mounted on the spoke or brake disc
passes the sensor. With each generated signal, the menu jumps one point further. The selection is confirmed by
switching off the e-bike when the menu item is displayed. The menu can be aborted at any time by driving off.
Call up the menu and select the desired menu item
1.
Switch on e-bike in tuning mode (see 3.3) → [Display shows 10
2.
Wait until menu starts (approx. 15 seconds) → [Display jumps from 10
3.
Generate sensor signals by turning the rear wheel → [With each individual sensor signal, the menu jumps
one step further]
4.
Switch off the e-bike as soon as the display shows the desired menu item → [Menu item is confirmed]
]
to 11
, menu is active]
Werbung
