Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Operation
3.1. Calibration
The calibration must be carried out once. It must be carried out at a standstill and with the battery pack inserted. It
is called up automatically on the first start. For e-bikes without a display, the calibration must be carried out using
the FLOW app. The FLOW app must be installed and set up before installing the module. The calibration consists of
two sections. First a rough calibration, then a fine one. In the first section of the calibration, an increasing speed is
output on the speedometer. Switch off the e-bike as precisely as possible at 10.0
After switching on again, the fine calibration is carried out. A speed is output on the speedometer, which gradually
approaches 10.0
in small steps and, in the meantime, briefly drops towards 0.0
for the first time (it can take several minutes), switch off the e-bike again and wait at least 5 seconds.
Necessary previous settings:
the calibration that the wheel circumference is set to the standard value (factory setting). This can be done via the
Kiox (Settings → My eBike → Wheel circumference) or the Flow app (SeTngs → My eBike – manage your eBike
settings → Wheel circumference). When calibraQng again, this must first be reset to the standard value (factory
setting). In addition, the unit of the speed display must be set to metric ( ).
Note FLOW app:
possible to open the speed display of the Flow app (ride screen). To make this possible during the ongoing calibration,
simply generate a single sensor signal by turning the rear wheel (just one turn!). The module then pauses the
calibration for a few seconds and the FLOW app is released.
Cancel calibration: If the e-bike is ridden in calibration mode, the calibration is aborted and the sIMPLEk jumps
back to 1:1 mode. In this case, no calibration took place.
In order for the module to function correctly, it is necessary before performing
While the e-bike is receiving speedometer signals from the module or speed sensor, it is not
and wait at least 5 seconds.
. As soon as 10.0
is displayed
Werbung
