Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.1. Installation example Bosch Performance-Line from 2023 and newer:
Tools needed:
•
Torx 20 socket wrench
•
Optional: flat nose pliers
Remove the two torx screws with the socket wrench (image 1). Now the engine cover can be removed. If necessary,
use flat-nosed pliers to pull out the speed sensor plug (image 2).
Now connect the plug of the sIMPLEk to the position of the previously unplugged speed sensor. The speed sensor is
then connected to the connector of the sIMPLEk. When plugging in, make sure you hear/feel it clicks into place.
image 1
image 2
Werbung
