Herunterladen Diese Seite drucken

Simplek Pro Nano Bedienungsanleitung Seite 17

Version bosch smart system
Vorschau ausblenden Andere Handbücher für Pro Nano:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Carrying out calibration at first start-up with the KIOX 300 display:
1.
Switch on the e-bike → [Kiox shows slowly increasing speed, calibration level 1]
2.
Switch off e-bike at approx. 10.0
3.
Switch on the e-bike → [Kiox shows slowly increasing speed and keeps
dropping towards 0
4.
Switch off e-bike at exactly 10.0
Start the calibration again manually with the Kiox 300:
1.
Switch on e-bike → [Kiox stays at 0.0
2.
Switch off the e-bike after it has booted up completely, wait 5 seconds
3.
Switch on e-bike → [Kiox shows 10.0
tuningmode]
4.
Switch off the e-bike after 10.0
5.
Switch on the e-bike → [CalibraQon level 1]
Carrying out calibration at first start-up with the FLOW app
1.
Open the „Ride" window in the FLOW app.
2.
Switch on e-bike → "Open ride screen" appears in the FLOW app → Open the ride screen → [Ride screen
shows slowly increasing speed, calibration level 1]
3.
Switch off the e-bike at approx. 10.0
4.
Switch on the e-bike → [Ride screen shows slowly increasing speed and
keeps dropping towards 0
5.
Switch off e-bike at exactly 10.0
Start calibration again manually with the FLOW app
1.
Open the „Ride" window in the FLOW app.
2.
Switch on e-bike → "Open ride screen" appears in the FLOW app → Open the ride screen → [Ride screen
stays at 0.0
3.
Switch off the e-bike and leave the ride screen open, wait at least 5 seconds.
4.
Switch on the e-bike → [Ride screen shows 10.0
constant value), tuningmode]
5.
Switch off the e-bike after 10.0
leave the ride screen open, wait 5 seconds
6.
Switch on the e-bike → [Calibration level 1]
, wait 5 seconds
, calibration level 2]
, wait 5 seconds
or another constant value is displayed, wait 5 seconds
, calibration level 2]
, wait 5 seconds
, 1:1 mode]
or another constant value is displayed and
, 1:1 mode]
with correct calibration (otherwise a different constant value),
and leave the ride screen open, wait at least 5 seconds
(consider the FLOW app
with correct calibration (otherwise a different
(consider the FLOW app
note!):
:
note!)

Werbung

loading

Verwandte Produkte für Simplek Pro Nano