Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14
WARNING!
!
of your grill.
EN
Lights: To replace the halogen bulb in your grill you must 昀椀rst remove the lens from the light housing. To
remove the lens from the housing, remove the Philips screw securing the housing in place. Snap the lens
out of the housing (including the metal bracket). Do not touch the halogen bulb with your bare hands.
The oil from your 昀椀nger琀椀ps will reduce the life of the bulb. With gloved hands gently pull the old bulb
from the socket and replace with the new bulb. Reinstall the lens, by snapping it back into the housing
and bend the tabs on the front of the housing back in to posi琀椀on.
Troubleshoo琀椀ng
Problem
Low heat / Low 昀氀ame
when valve turned to
high.
Excessive 昀氀are-ups/
uneven heat.
Burners burn with yellow
昀氀ame, accompanied by
the smell of gas.
www.napoleon.com
Always wear protec琀椀ve gloves when changing the halogen bulb in the internal lights
1
3
Possible Causes
For propane - improper ligh琀椀ng procedure.
For natural gas - undersized supply line.
For both gases - improper prehea琀椀ng.
Sear plates installed incorrectly.
Improper prehea琀椀ng.
Excessive grease and ash build on sear
plates and in drip pan.
Possible spider web or other debris in
burner.
2
Solu琀椀on
Ensure ligh琀椀ng procedure is followed
carefully. All gas grill valves must be in the
o昀昀 posi琀椀on when the tank valve is turned
on. Turn tank on slowly to allow pressure to
equalize. See ligh琀椀ng instruc琀椀ons.
Pipe must be sized according to installa琀椀on
code.
Preheat grill with both main burners on high
for 10 to 15 minutes.
See assembly instruc琀椀ons.
Preheat grill with main burners on high for 10
to 15 minutes.
Clean sear plates and drip pan regularly. Do
not line pan with aluminum foil. Refer to
cleaning instruc琀椀ons.
Thoroughly clean burner by removing. See
general maintenance instruc琀椀ons.
N415-0542CE-GB-DE FEB 01.22
Werbung
