Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.21. How to Edit a Stored Waveform
(1)
Enter the operation menu: Press
(2)
Enter the storage path of the desired waveform file. Turn the knob or press
direction key to select the desired waveform file.
(3)
Choose Recall suppress.
5.22. How to Delete a Stored Waveform
(1)
Press Save function button to enter the file system.
(2)
Enter the storage path of the desired waveform file. Turn the knob or press
direction key to select the desired waveform file.
(3)
Choose Delete.
5.23. To Output DC
Press CH1/2 to select the channel that you want to output DC (P4125 – 4165) or
(1)
press DC -key (P 4124).
(2)
Press
button, then press
(3)
Press F4 to select Others. Select DC. Press F1 to output DC.
(4)
Press F3 , confirm whether the "Offset" menu item is highlighted; if not, press F3
to switch into "Offset". In Parameter 3, a cursor appears under the value of offset.
Use the knob or the number keys to set the desired value and choose the unit.
F4 to enter the Built-in Wform menu.
Figure 0-15: The DC Setting Interface
80
→Editable Wform →Edit Wform.
/
/
Werbung
