Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.16. To Output Arbitrary Signals
Press
button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to "To
Output Sine Signals".
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Channel
Load
Amplitude
Offset
Built-in Exponential
Rise Waveform
5.17. To Select the Built-in Waveform
There are 45 built-in Arbitrary waveforms.
Menu
Settings
Common StairD StairU StairUD Trapezia RoundHalf
AbsSine
NegRamp AttALT AmpALT CPulse PPulse
NPulse
Maths
ExpRise ExpFall Sinc Tan Cot Sqrt XX
HaverSine Lorentz ln Cubic Cauchy Besselj
Bessely Erf Airy
Window
Rectangle Gauss Hamming Hann Bartlett
Blackman Laylight Triang
Parameter 1
Parameter 2
Figure 0-14: The User Interface of Arbitrary Signal
AbsSineHalf
SineTra
Frequency
Parameter 3
Explanation
Choose common Waveforms
SineVer
Choose Math Waveforms
Choose Window Waveforms
77
Current signal
Setting menu of
Arbitrary signal
Werbung
