Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Table of Contents
1. Safety Precautions
2. Safety Terms and Symbols
2.1. Safety Terms
2.2. Safety Symbols
3. General Characteristics
4. Quick Start
4.1. Front / Rear Panel and User Interface
4.2. Rear Panel
4.3. User Interface
4.4. General Inspection
4.5. Foot Stool Adjustment
4.6. AC Power Input Setting
4.7. Power On
5. Front Panel Operation
5.1. To Set channels
5.2. To Set signals
5.3. To Output Sine Signals
5.4. To Set the Frequency / Period
5.5. To Set the Amplitude
5.6. To Set the Offset
5.7. To Set the High Level
5.8. To Set the Low Level
5.9. To Output Square Signals
5.10. To Set the Duty Cycle
5.11. To Output Ramp Signals
5.12. To Set the Symmetry
5.13. To Output Pulse Signals
5.14. To Set Pulse Width / Duty Cycle
5.15. To Output Noise Signals
5.16. To Output Arbitrary Signals
5.17. To Select the Built-In Waveform
5.18. The User-Definable Waveform
5.19. How to create a new Waveform
5.20. How to select a stored Waveform
5.21. How to edit a stored Waveform
5.22. How to delete a stored Waveform
5.23. To Output DC
5.24. To Generate the Modulated Waveform
5.25. AM (Amplitude Modulation)
5.26. How to set the parameters of AM
5.27. FM (Frequency Modulation)
3
Page
59
60
61
62
63
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
Werbung
