Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Save button
7
Utility button
8
Help button
9
Output
10
CH Output
11
Foot stool
12
Trigger
13
Sync Port
17
Waveform
selection buttons
18
Power button
4.2. Rear Panel (P 4120 – 4124)
1
Reference input
2
USB Device port
3
Power switch
4
Power socket
5
Fuse
*
Reference Output
Note: The model P 4120 A and 4124 A use additional Input/Output BNC Sockets for the
power amplifier.
Store/recall the user-defined arbitrary waveform data or
instrument state
Set the auxiliary system function.
View the build-in help information
Switch On/ Off this channel. If ON, the button is illuminated
Signal of Channel 1
Make the instrument to be tilted for ease of operation
Turn on/off the Sync Port. The backlight will be lighted when
Sync Port is tuned on.
Sync output signal
Include: Sine
, Square
and Arbitrary
waveform. When a waveform is selected,
the backlight of the button turns on.
Turn on/off the generator
Figure 0-2 Rear panel overview
The connector [Ref Clk In] can be used to accept the
input signal an external clock
Connect as a "slave device" with an external device,
such as connected to a PC and controlled via PC
software.
Switch between 110V and 220V.
AC input connector
Use the specified fuse according to the voltage scale.
No Picture: Output of internal reference clock (P 4124)
65
, Ramp
, Pulse
, Noise
Werbung
