Rollei Candela 220 Bi-Color Anleitung Seite 35

Operation
Effect mode
EFF mode
button
Rate option
button
Light effect
– Press the effect mode button [1] to enter effect mode .
– You can change the effect by pressing it repeatedly . You can
choose from a total of 10 effects (see table on page 36) .
– The brightness (DIM) of the effects can be adjusted between 0
and 100 % . By briefly pressing the brightness adjustment dial [5],
you change the value in 1 % steps . If you keep the dial pressed,
the saturation is adjusted in 10 % steps . Preset brightness levels
(0, 25, 50, 75 and 100 %) can be set by pressing the brightness
adjustment dial [5] .
– The frequency (RATE) of the effects can be adjusted by pressing
the frequency button . The frequency is shown on the display .
– The color temperature of selected effects can be adjusted by
turning the color temperature dial [8] .
By briefly pressing the adjustment wheel, you change the value
in 50 K steps . If the adjustment wheel is held steady, the colour
temperature is adjusted in 100 K steps .
– Preset colour temperatures (2,700, 3,200, 4,000, 5,600 and
6,500 K) can be controlled by pressing the colour temperature
dial [8] .
RATE
(Frequency)
DIM
(Brightness)
CCT (Color
temperature)
35