Repeater Function - Rollei Candela 220 Bi-Color Anleitung

Settings of the COB Continuous Light
40

Repeater function

The repeater function can be used to bridge larger distances between
the connected lights . The ideal distance between transmitter (TX),
receiver (RX) and transmitter+receiver (TXRX) is 10 metres .
If the distance between the COB continuous lights in a group is more
than 10 metres, it is recommended to place a COB continuous light in
the middle as a signal repeater point to increase the control distance .
In addition, when connecting more than five luminaires, the response
of the product can be effectively improved if the repeater function
of a COB continuous light is turned on . If there are more than 10
COB continuous lights, two COB continuous lights with the repeater
function are recommended, etc .
Note: Too many switched-on repeater functions on various lights
can disrupt the connection and lead to interference .
Rx
Tx
Positioning within the
distance of 10 m .
ø ≤ 10 m
Rx
TxRx
R = 10 m
ENGLISH
TX / Rx/
TxRx
RP:on
Positioning at a distance of
more than 10 m .
Dist > 10 m
TX /Rx/
TxRx
R = 10 m