Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Settings of the COB Continuous Light
38
Overheating alarm: When the overheating alarm symbol
flashes, the temperature inside the COB continuous light is too
high . The COB continuous light must be switched off to avoid
damage . If it is not switched off in time, the COB continuous light
switches off automatically .
Group status (symbols)
The COB continuous lights can act as transmitters and receivers in
the group function for bridging larger distances .
No connection to a group . The COB continuous light is not
affected by the settings of other groups .
The first letter indicates the group assignment .
A total of 15 groups are available (A – O) .
T indicates that the COB continuous light acts as a trans-
mitter .
The first letter indicates the group assignment .
A total of 15 groups are available (A – O) .
R indicates that COB continuous light acts as a receiver .
Der The first letter indicates the group assignment .
A total of 15 groups are available (A – O) .
TR indicates that the COB continuous light acts as trans-
mitter and receiver .
Group
Turn the color temperature adjustment wheel [8] to select between
ZERO (no group) and groups A to O .
Communication
Turn the color temperature adjustment wheel
[8] to select between TX, RX and TXRX . TX, RX
and TXRX can be selected . TXRX is set at the
factory .
ENGLISH
COMM.
RX
RP
ON
CURVE
LINEAR
Werbung
Inhaltsverzeichnis
