Setup; On/Off Button, Mode Button And Setting Wheels - Rollei LUMIS U-Light Anleitung

Setup

22
The smartphone holder [12] can be connected with the Rollei LUMIS U-Light
via the adjustment wheel with ¼" screw [1]. Once attached, you can attach
your smartphone to the smartphone holder [12]. Alternatively, you can also
use the ¼" screw of the adjustment wheel [1] to attach your webcam with ¼"
screw thread to the Rollei LUMIS U-Light.

On/off button, mode button and setting wheels

On / Off button and mode button [6]
Turning wheel for the regulation of the brightness [4]
Turning wheel for the regulation of colour temperature [5]
The Rollei LUMIS U-Light can be switched on and off via
pushing the on / off button and mode button [6] long. By
pushing the button shortly, a part of the LEDs can be switched
off. By pushing it shortly again, the LEDs can be fully switched
on again.
The brightness can be steplessly regulated via the turning
wheel for the regulation of the brightness [4].
The colour temperatures can be steplessly set between cool
white and warm white (between 2500 K and 8500 K) via the
turning wheel for the regulation of colour temperature [5].
ENGLISH