Structure And Possible Combinations; Additional Equipment - Rollei Candela 220 Bi-Color Anleitung

Structure and Possible Combinations

30

Additional Equipment

1. Remove the protective cap
– Before each use, remove the protective cap and the protective film
BEFORE you switch on the COB permanent light .
– To remove the protective cap from the light, turn it in the direction
of the arrow and then pull it off towards the front .
2. Mounting and dismounting the reflector
– Align the reflector (not included in the box content) with the
groove around the lamp head and clip it in place, turn the reflec-
tor in the direction of the arrow .
– Reflector installation is complete when the top rod springs back .
– To remove the reflector, slide the bayonet release backwards and
turn the reflector counterclockwise .
ENGLISH