Connecting The Mains Adapter - Rollei Candela 220 Bi-Color Anleitung

Structure and Possible Combinations
32
Additional Equipment

5. Connecting the mains adapter

– Mount the mains adapter . Do not hang the
mains adapter in the air, but use wire rings
to hang it from the lamp stand .
– Connect the power adapter, align the pin with
the DC connector of the lamp body, and then
switch through the cable after it is stable .
– Please switch off the lamp before discon-
necting the power cord . When disconnecting
the power cord, hold the safety lock on the
plug before pulling it out . When the lock
is released, do not forcibly disconnect the
power supply .
6. Connecting a rechargeable battery
– Attach the V-mount battery to the lamp
using the NATO extension bar with VM3
(optional) .
– Connect the D-Tap XLR power cable (not
included in the box content) to start the
lamp .
7. Connecting several lights
Equipped with a NATO extension
rail and an NQD quick-action
clamping device (neither included
in the delivery), the lights can be
connected to each other, whereby up
to three luminaires can be combined
with up to three luminaires can be
combined .
ENGLISH