Sony CBK-3620XS Bedienungsanleitung Seite 20

Location and Function of Parts
 Camera body adaptor
Adaptor that attaches to the camera body
to extend the imager block.
 MONITOR IN connector (BNC type)
Connector that inputs the relayed monitor
signal to the imager block adaptor.
 24 V IN connector (Fischer 3-pin)
DC power supply input connector that
supplies the external power supply to the
imager block adaptor.
 ASSIGN (assignable) button 3
Toggles the assigned function between
on/off (enable/disable) or activates the
function with each press.
The lamp is lit orange when the assigned
function is on (enabled) or activated.
For details about function assignment,
refer to the MPC-3628/MPC-3626/MPC-
3610 Operating Instructions.
20
Location and Function of Parts
 Imager block adaptor (3 m (9.8 ft))
Adaptor (with extension cable) that
attaches to the imager block removed from
the camera.
 Receiver
Receiver adaptor that connects to the
camera body adaptor.
 ASSIGN (assignable) button 5
Toggles the assigned function between
on/off (enable/disable) or activates the
function with each press.
The lamp is lit orange when the assigned
function is on (enabled) or activated.
For details about function assignment,
refer to the MPC-3628/MPC-3626/MPC-
3610 Operating Instructions.
 ASSIGN (assignable) button 6
Toggles the assigned function between
on/off (enable/disable) or activates the
function with each press.