First Use - IKEA RENLIG FWM7 Bedienungsanleitung

ENGLISH
Delay Start button
Display
10.1 10.2

First use

• Ensure that the electrical and water
connections comply with the installa-
tion instructions.
• Remove the polystyrene block and
any material from the drum.
The programme can be delayed from 30 min - 60 min - 90
min, 2 hours and then by 1 hour up to a maximum of 20 hours
by means of this button.
The display shows the following information:
• 10.1
– Child safety lock.
This device permits you to leave the appliance unatten-
ded during it's functioning.
• 10.2
– Duration of the selected programme.
After selecting a programme, the duration is displayed in
hours and minutes (for example
calculated automatically on the basis of the maximum rec-
ommended load for each type of fabric. After the pro-
gramme has started, the time remaining is updated every
minute.
– Delayed start.
The Selected delay set by pressing the relevant button
appears on the display for a few seconds, then the dura-
tion of the selected programme is displayed again. The
delay time value decreases by one unit every hour and
then, when 1 hour remains, every minute.
– Alarm codes.
In the event of operating problems, some alarm codes can
be displayed, for example
to do if...»).
– Incorrect option selection.
If an option which is not compatible with the set wash pro-
gramme is selected, the message Err is displayed at the
bottom of the display for a few seconds and the integra-
ted red indicator light of button 5 start flashing.
– End of programme.
When the programme has finished the flashing zero (
is displayed, the indicator light 3 and the indicator light of
button 5 go out and the door can be opened.
(see paragraph «What
• Before the first wash, run a cotton cy-
cle at the highest temperature without
any laundry in the machine, to re-
move any manufacturing residue from
the drum and tub. Pour 1/2 a meas-
ure of detergent into the main wash
compartment and start the machine.
10
). The duration is
)