Before First Use; Settings; Daily Use - IKEA RENLIG Handbuch

ENGLISH
Spin button
Temperature button

Before first use

1. Ensure that the electrical and water
connections comply with the installation
instructions.

Settings

Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.

Daily Use

Loading the laundry
Open the water tap. Connect the mains
plug to the mains socket.
1. Pull the door handle to open the
appliance door.
By pressing this button, you can set one of these options:
The indicator of the set option comes on.
• Automatic spin reduction
Set this option to decrease the maximum spin seed to a half,
but not less than 400 rpm.
Suitable for very delicate fabrics.
• Rinse Hold
Set this option to prevent the laundry creases. The drum turns
regularly to prevent the laundry creases.
There is a water in the drum when the programme
is completed. The door stays locked. You must
drain the water to unlock the door. To drain the
water refer to 'At the end of the programme'.
By selecting a programme, the appliance proposes automatical-
ly a default temperature. This button allows you to increase or
decrease the washing temperature. If you select
appliance will perform a washing with cold water.
The relevant indicator illuminates.
2. Remove any material from the drum.
• To activate/deactivate this option touch
the buttons
until the indicator
2. Put the laundry in the drum, one item at
a time.
3. Shake the items before you put them in
the appliance.
position, the
and at the same time
comes on/goes off.
10