Pkm KG 241.4 A++ weiß Bedienungsanleitung Seite 28

3. Remove the two screws (5) of the middle hinge (6). Remove the middle hinge
(6).
4. Remove the lower door from the bottom hinge pin (lift) and place it on a non-
scratching surface.
5. Remove the two screws (7) of the bottom hinge (8). Remove the bottom
hinge(8).
6. Remove the left front foot (9) and transfer it to the right side.
7. Before reinstalling the bottom hinge (8), remove the hinge pin (10) and change
the direction of the hinge (8). Install the bottom hinge (8) on the opposite side.
8. Refit the hinge pin (10) into the bottom hinge (8).
9. Lower the door onto the bottom hinge pin (10).
10. Install the middle hinge (6) with the 1 mm washers (13) and the two screws (5)
on the opposite side, while keeping the door closed. Do not tighten the screws
(5) unless the door is level with the worktop.
11. Before installing the top hinge (4), transfer the hinge pin (2) from the right hole
to the left hole of the top hinge (4).
12. Lower the top door onto the middle hinge pin.
13. Install the top hinge (4) and the top hinge cover (12) with the two screws (3)
on the opposite side. Do not tighten the screws (3) unless the door is level with
the worktop.
Door opening/left
14 2 mm washer (original)
Door opening/right
12 Hinge cover (bag)
13 1 mm washer (bag)
28