Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WILL THERE BE A WARNING IN THE APP BEFORE
THE ACE KETOSCAN MINI IS DEACTIVATED AFTER
320 TEST (300 TESTS + 20 EXTRA TESTS)?
Yes, there is warning message on the app. When the
ACE KETOSCAN mini reaches 300 tests resp. 320 tests
(20 extra tests are possible), then depending on the test
number you see the first* resp. the second message**
on the app before the test. But please make sure to
pair the ACE KETOSCAN mini with the app to see these
messages.
*1. Message when reaching 300 tests: You have reached
300 test cycles. There are 20 tests remaining. You are
encouraged to have this device recalibrated at this
time. After the remaining 20 test cycles the device will
be disabled until it can be recalibrated. This is to ensu
re this sensitive device continues to provide accurate
results.
**2. Message when reaching 320 tests: This device is
disabled. Please contact the distributor or manufacturer
to replace/recalibrate the sensor.
IS IT POSSIBLE TO READ THE NUMBER OF TESTS
REMAINING UNTIL THE NEXT CALIBRATION DIRECTLY
ON THE KETOSCAN MINI?
No, this is not possible. However, after the 300th test, a
call sign (!) is displayed on the Ketoscan mini. As soon
as this call sign is displayed, the device should be sent
in for calibration. This prevents the device from being
unusable due to the lock after the 320th test.
48
Werbung
