Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PREPARATION FOR THE TEST
1. Charge the lithiumion battery (3.7V) integrated in the
device by using the charging cable supplied.
2. Put a mouthpiece on the side opening for attaching
the mouthpieces (= the opening on the right side of
the front of the device).
CONDUCTING THE MEASUREMENT
It is important to breathe into the device correctly. We
recommend that you do not take a deep breath before
blowing. Instead, inhale briefly before blowing, hold your
breath for two seconds and only then start blowing. Try
to blow in the same way each time you perform a test.
USAGE WITH THE KETOSCAN APP
1. Search 'KETOSCAN' at Google Play (Android) or App
Store(iOS) and install the KETOSCAN app.
2. Turn on the Bluetooth and GPS on your smartphone.
3. Run the installed KETOSCAN app.
4. Turn on the ACE KETOSCAN mini by pushing the
power for 2 seconds.
5. Tab "Pair Ketoscan" to search KETOSCAN mini and
select your KETOSCAN mini on the paring list.
6. Input necessary information and start the test.
PLEASE NOTE:
» Make sure to run the app first and then turn on the
ACE KETOSCAN mini.
» It can be paired normally when activate location
(GPS) function and accept to allow the location in
formation when run the app.
» Reattempt after network initialization when there
are many connected Bluetooth devices in case of
Android device.
» Log in with your ID and use the app to retrieve your
records from other ACE KETOSCAN mini.
38
Werbung
