Seite 3
TDS 600C Features Most TDS 600B information in the TDS 500D, TDS 600B, & TDS 700D Digitizing Oscilloscopes User manual is valid for the TDS 654C, TDS 680C, and TDS 684C oscilloscope models. This supplement lists the differences between the TDS 600C and the TDS 600B models.
Seite 4
Standard denotes a standard product feature as opposed to a feature included as part of an option. GPIB I/O included with all models. Display Histograms The TDS 600C can display histograms as described in the TDS 500D, TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual. Select an Application The TDS 600C can select and load Java-based applications in the APPLICA- TION menu as described in the TDS 500D, TDS 600B &...
Seite 5
TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual. Probe Calibration On the TDS 600C, use the TDS 500D and TDS 700D procedures to calibrate a probe as described in the TDS 500D, TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual.
Seite 6
TDS 600C Features Options Tektronix will ship the options shown in Table 2: Table 2: Options Option # Label Description Universal European 220 V, 50 Hz power cord power cord UK power cord 240 V, 50 Hz power cord Australian power cord...
Seite 7
Oscilloscope comes with a P6701B and calibrated short-wavelength optical reference calibration receiver on channel 1. (Option applies to TDS 500D & TDS 700D only, except TDS 794D.) P6703B with system Oscilloscope comes with a P6703B and calibrated long-wavelength optical reference calibration receiver on channel 1.
Seite 8
Two P6139A 10X, 500 MHz Passive probes P6139A TDS 794D, TDS 784D, TDS 684C, TDS 680C, TDS 580D: No probes standard Front Cover 200-3696-01 Accessory Pouch (TDS 654C, TDS 684C, TDS 700D) 016-1268-00 U.S. Power Cord 161-0230-01 TDS 500D, TDS 600C & TDS 700D Supplement...
Seite 11
Supplément Oscilloscopes numériques TDS 500D, TDS 600C & TDS 700D 071-0273-02 Le présent document s’applique aux versions ma- térielles 5.1 et ultérieures.
Seite 12
Copyright Tektronix, Inc. Tous droits réservés. Les produits Tektronix sont protégés par des licences américaines et étrangères, publiées et en attente de publication. Les informations contenues dans le présent manuel remplacent et annulent toute documentation publiée antérieurement. Les changements de spécifications et de prix sont sous réserve.
Seite 13
Fonction du TDS 600C La plupart des informations concernant le TDS 600B dans le Manuel d’utilisa- tion des oscilloscopes numériques TDS 500D, TDS 600B & TDS 700D sont aussi valables pour les modèles TDS 654C, TDS 680C et TDS 684C. Ce supplément présente les différences qui existent entre les modèles TDS 600C et TDS 600B.
Seite 14
APPLICATION, comme cela est décrit dans le Manuel d’utilisation des oscilloscopes numériques TDS 500D, TDS 600B & TDS 700D. L’opérateur peut ensuite contrôler l’application à l’aide des menus APPLICATION. Oscilloscopes numériques TDS 500D, TDS 600C & TDS 700D...
Seite 15
TDS 600B & TDS 700D. Etalonnage des sondes Sur le TDS 600C, utilisez les procédures TDS 500D et TDS 700D pour étalonner les sondes conformément à la description fournie dans le Manuel d’utilisation des oscilloscopes numériques TDS 500D, TDS 600B & TDS 700D.
Seite 16
Fonction du TDS 600C Options Tektronix peut expédier les options répertoriées dans le Tableau 2 : Tableau 2 : Options Option n Etiquette Description Cordon d’alimentation universel Cordon d’alimentation 220 V, 50 Hz européen Cordon d’alimentation britannique Cordon d’alimentation 240 V, 50 Hz Cordon d’alimentation australien...
Seite 17
TDS 794D, TDS 784D, TDS 680C, TDS 684C et TDS 580D.) Ajoute les fonctions DSP évoluées telles que FFT, intégration et différentiation. Fonctions DSP évoluées (Cette option concerne uniquement les modèles TDS 500D.) Oscilloscopes numériques TDS 500D, TDS 600C & TDS 700D...
Seite 18
TDS 794D, TDS 784D, TDS 684C, TDS 680C, TDS 580D : Pas de sondes standard Couvercle de face avant 200-3696-01 Trousse pour accessoires (TDS 654C, TDS 684C, TDS 700D) 016-1268-00 Cordon d’alimentation pour les Etats-Unis 161-0230-01 Oscilloscopes numériques TDS 500D, TDS 600C & TDS 700D...
Seite 19
Trousse pour accessoires (TDS 500D et TDS 680C) 016-1268-00 Mallette de transport à parois souples 016-0909-01 Mallette de transport 016-1135-00 Câble GPIB (1 mètre) 012-0991-01 Câble GPIB (2 mètres) 012-0991-00 Câble Centronics 012-1214-00 Câble RS-232 012-1298-00 Oscilloscopes numériques TDS 500D, TDS 600C & TDS 700D...
Seite 21
Zusatz Die Digitaloszilloskope TDS 500D, TDS 600C und TDS 700D 071-0273-02 Dieses Dokument unterstützt Firmware der Version 5.1 und höher.
Seite 22
Copyright E Tektronix Inc. Alle Rechte vorbehalten. Die Tektronix-Produkte sind von amerikanischen und nicht-amerikanischen, erteilten und laufenden Patenten gedeckt. Die Informationen dieser Veröffentlichungen ersetzen die aller vorhergehenden. Die Spezifikationen und Preise können ohne Vorankündigung geändert werden. Gedruckt in U.S.A. Tektronix Inc., P.O. Box 1000, Wilsonville, OR 97070–1000...
Seite 23
Funktionen des Modelle TDS 600C Die meisten Informationen zum Modell TDS 600B im Benutzerhandbuch TDS 500D, TDS 600B, & TDS 700D Digitaloszilloskope gelten auch für die Oszilloskopmodelle TDS 654C, TDS 680C und TDS 684C. In diesem Zusatz werden die Unterschiede zwischen den Modellen TDS 600C und TDS 600B beschrieben.
Seite 24
Standard bezeichnet eine Standard-Produktfunktion im Unterschied zu einer Funktion, die Teil einer Option ist. GPIB E/A ist in allen Modellen enthalten. Histogramme anzeigen Das Modell TDS 600C kann die im Benutzerhandbuch TDS 500D, TDS 600B & TDS 700D Digitaloszilloskope beschriebenen Histogramme anzeigen. Eine Anwendung Das Modell TDS 600C kann im Menü...
Seite 25
Iomega Zip-Laufwerks TDS 500D-, TDS 600B- und TDS 700D-Digitaloszilloskope – Benutzerhandbuch beschrieben, kompatibel. Messungsstatistiken Das Modell TDS 600C kann Statistiken über eine Messung, wie im TDS 500D-, anzeigen TDS 600B- und TDS 700D-Digitaloszilloskope – Benutzerhandbuch beschrieben, – anzeigen. Optische Messungen Mit dem Modell TDS 600C können das Belichtungsverhältnis, der Belichtungs-...
Seite 26
TV-Signale überprüfen. (Diese Option steht beim Modell TDS 794D nicht zur Verfügung.) RS-232/Centronics Hardco- Fügt RS-232-C- und Centronics-Schnittstellenanschlüsse hinzu. (Diese Option steht nur beim Modell TDS 500D zur Verfügung.) Schnittstellenanschlüsse 1 GS/s maximal Beschränkt die Abtastrate auf max. 1 GS/s.
Seite 27
P6701B mit Systemkalibrier- Das Oszilloskop wird mit einem P6701B- und einem optischen kalibrierten Kurzwellen-Re- ferenzempfänger auf Kanal 1 ausgeliefert. (Diese Option steht nur bei den Modellen TDS 500D und TDS 700D zur Verfügung, außer beim Modell TDS 794D.) P6703B mit Systemkalibrier- Das Oszilloskop wird mit einem P6701B- und einem optischen kalibrierten Langwellen- Referenzempfänger auf Kanal 1 ausgeliefert.
Seite 28
TDS 654C: Vier aktive P6243-Tastköpfe, 1 GHz P6243 TDS 724D und TDS 520D: Zwei passive P6139A 10X-Tastköpfe, 500 MHz P6139A TDS 794D, TDS 784D, TDS 684C, TDS 680C, TDS 580D: Standardmäßig keine Tastköpfe Frontschutzdeckel 200-3696-01 TDS 500D, TDS 600C & TDS 700D Zusatz...