Dispensing Hot Water; Adjusting Quantity And Taste; Saeco Adapting System; Adjusting Coffee And Milk Length - Saeco Incanto HD8919 Bedienungsanleitung

1
1
2

Adjusting quantity and taste

Saeco Adapting System

Adjusting coffee and milk length

Tilt the hot water dispensing spout slightly and insert it into the machine.
Press and turn the hot water dispensing spout downwards to lock it in the
machine.
To remove the hot water spout:
Press the release buttons on the sides of the hot water dispensing spout
to unlock it.
Lift the hot water dispensing spout slightly and pull it out of the machine.

Dispensing hot water

Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until the cycle has ended before
removing the hot water dispensing spout.
Press the MENU button. Select 'Drinks', confirm and scroll to select 'Hot
water'.
Caution: Only select 'Hot water' in the menu when the hot water
dispensing spout is installed.
Press the OK button to confirm.The display reminds you to install the hot
water dispensing spout, press the OK button to confirm. The machine
starts dispensing hot water.
-
To stop dispensing hot water, press the OK button.
Coffee is a natural product and its characteristics may vary according to
origin, blend and roasting. The machine is equipped with a self-adjustment
system that allows it to get the best taste out of your favorite coffee beans.
It regulates itself after brewing some coffees.
You can adjust the quantity of beverage brewed according to your taste and
to the size of the cups.
English