Coffee Brewing; Dispensing Hot Water - Saeco Dually Bedienung Und Wartung

English
* NESPRESSO and ESPRESSO POINT brands are neither
property of Saga Coffee S.p.A. nor of other related
companies.
9.4

Coffee brewing

Before brewing coffee make sure that:
• the machine is filled with water and ready for use
(warm-up cycle done);
• the capsule is inserted correctly;
• a cup and/or mug suitable for the desired product is
placed under the dispensing spout.
On the control panel press the desired button, keeping in
mind that:
• "ESPRESSO", "COFFEE" and "MANUAL BREWING"
buttons are intended to brew a single coffee, which can be
strong, long or of any other desired length;
The selected key produces an animated circle, which
indicates the brewing is in progress.
1 Animated key = beverage in brewing phase
2 Machine pressure bar
Product brewing stops automatically when the preset level
is reached.
It is possible to press the button again to stop the brewing
at any point. The 'X' icon that appears within the selected
button has this exact meaning.
For "MANUAL BREWING" types of coffee, it is necessary
to press the button again to stop brewing at the desired
quantity.
For more information on the keys and coffee types and on
browsing within the control panel, please read chapter
"Description of controls".
110
9.5

Dispensing hot water

Danger
Dispensing
preceded by small jets
of hot
steam.
The hot water wand
may reach
temperatures: do not
touch it
hands.
Before dispensing hot water make sure that:
• the machine is filled with water and ready for use
(warm-up cycle done);
• a suitable container is placed below the dispensing spout.
Place the hot water
dispensing wand into
the suitable container.
To dispense hot water, press the central display button.
of burning!
may be
water and
high
with bare