Brewing Coffee With Pre-Ground Coffee; Dispensing Hot Water - Saeco Xelsis SUPREMA SM8885 Benutzerhandbuch

Brewing coffee with pre-ground coffee

To brew coffee with pre-ground coffee, you need to follow a few simple steps.
1 Open the lid of the pre-ground coffee compartment and pour one measuring spoon of pre-ground
coffee into it. Then close the lid.
2 Tap the Drinks icon, scroll from left to right and select your drink.
3 Tap the pre-ground coffee
4 You can adjust the settings to your preference by swiping the adjustable bars up and down.
5 Press the start/stop
If you select pre-ground coffee, you cannot adjust the coffee strength or brew more than one drink at the
same time.

Dispensing hot water

1 Make sure that the internal cappuccinatore is correctly attached to the machine (Fig. 1).
2 Place a cup under the spout.
3 Tap 'Hot Water' (Fig. 2).
4 Slide the adjustable bars up and down to adjust the hot water quantity or temperature to your
preference (Fig. 3).
5 Press the start/stop
6 To stop dispensing hot water before the machine is finished, press the start/stop
SM8782, SM8785 only) or press the stop icon again (SM8885, SM8889 only).
Personalization
The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted
drink in a personal profile. You can choose your own icon and your own profile name.
Get the best out of your beans with the BeanMaestro function
With BeanMaestro you are able to select the type and roast of your beans. It then optimizes the brewing
settings automatically, to get the best out of your coffee beans.
1 Tap on the Beans icon in the main menu (Fig. 4).
2 Tap the BeanMaestro function (Fig. 5).
3 Select the type of beans. You can choose between Arabica and Robusta blend.
4 Select the roasting level of your beans.
5 The brewing settings are optimized automatically.
6 Enjoy your next coffee.
icon.
icon to start brewing the selected drink.
icon.
9
English
icon again (SM8780,