Connecting To The Central Control Unit Ccu3 - eQ-3 HomeMatic IP wired HmIPW-WRC2-2 Installations- Und Bedienungsanleitung

Connecting to the Homematic IP Central Control Unit
v3
For local, software-based configuration and control via
PC, you can connect the presence sensor to a Central
Control Unit CCU3 and to use it in comprehensive
programs (see "5.4.1 Connecting to the Central Control
Unit CCU3" on page 39).
Connecting to the Homematic IP cloud (available soon)
For a flexible control via free smartphone app, connect
the device to the Homematic IP cloud (see "5.4.2
Connecting to the Homematic IP cloud using the Wired
Access Point" on page 42). You can
• control the wired system via smartphone app
using the Homematic IP Wired Access Point
(HmIPW-DRAP) or
• combine
Homematic IP devices via the Homematic IP
Access Point (HmIP-HAP).
5.4.1

Connecting to the Central Control Unit CCU3

To control and configure Homematic IP Wired devices
software-based and comfortably as well as use it in
central control unit programs, you have to connect it
to to the WebUI. To connect the device to the Central
Control Unit CCU3, proceed as follows:
• Set up your Central Control Unit CCU3 as
described in the operating manual and connect
wired devices
Start-up
with wireless
39