COLOUR COMBINATIONS
COLOUR COMBINATION
H
OW TO SWITCH ON THE DECORATIVE ILLUMINATION
1. Touch the « D
the coloured illumination of the extractor hood.
2. The indicator of this sensor goes on.
3. The coloured illumination is switched on.
H
OW TO SWITCH OFF THE DECORATIVE ILLUMINATION
1. Briefly touch the « D
off the coloured illumination of the extractor hood.
2. The indicator of this sensor changes to backlight mode.
3. The coloured illumination is switched off.
H
OW TO SET AN ILLUMINATION COLOUR OR A COLOUR COMBINATION
1. Touch and hold the « D
activate the setting mode of the illumination colours.
2. After the activation of the setting mode, the colour change of the decorative
illumination runs automatically and starts with the colour blue. The individual
colours merge into one another gradually and change their intensity at the same
time (from light to dark or from dark to light). The colour change is repeated
continuously (s. table below: « S
COLOUR COMBINATIONS IN SETTING MODE
3. During the automatic colour change in the setting mode: when you like an
illumination colour or a colour combination of several illumination colours, touch
the « D
ECORATIVE ILLUMINATION
pauses and the current illumination colour or colour combination remains for a
longer moment, so you have a good look at it.
To continue the automatic colour change, briefly touch the « D
ILLUMINATION
4. If you like the illumination colour or colour combination that remains for a
longer moment during the colour change pause, touch and hold the
« D
ECORATIVE ILLUMINATION
5. The illumination goes off, the setting mode is deactivated and the set illumination
colour or colour combination is saved.
6. The next time you switch on the decorative illumination, it will light up in the
illumination colour or colour combination you have set.
» and « H
»).
ECORATIVE ILLUMINATION
ECORATIVE ILLUMINATION
ECORATIVE ILLUMINATION
» -
once again.
SENSOR
» -
OW TO SET AN ILLUMINATION COLOUR OR A
» -
SENSOR
» -
SENSOR
EQUENCE OF THE ILLUMINATION COLOURS
(
AUTOMATIC COLOUR CHANGE
» -
once briefly. The colour change
SENSOR
for 3 seconds.
SENSOR
~ 81 ~
once briefly to switch on
once again to switch
» -
for 3 seconds to
SENSOR
ECORATIVE
/
) ».