Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Submerged installation of the pump
Connecting
B
Do not plug the power plug into the socket yet!
Installation
C
• Place the pump horizontally on a stable, mud-free surface.
• Ensure secure and stable positioning of the pump.
• Only operate the pump when it is fully submerged.
Commissioning/start-up
NOTE
Never connect the pump to a dimmer. Otherwise the pump will be destroyed.
NOTE
Prevent the pump from running dry. Otherwise the pump will be destroyed.
Only operate the pump when it is submerged or flooded.
Switching ON/OFF
• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
– Use the controller to set the flow rate to the desired value.
• Switching off: Pull the power plug from the outlet.
12
Werbung
